For Your Standard Water Pressure Booster System

• Power system:
  • 230 volts single phase
  • 230 volts or 460 volts or 575 volts three phase
• Horsepower Rating: ___ HP
• Enclosure type:
  
  • Powder coated or stainless steel (304 or 316)
  • NEMA 1 / NEMA 12 / NEMA 3R / NEMA 4 / NEMA 4X
  • Mounting type: wall / pedestal / legs / legs with skirts
  • Items on door / dead front with swing out inner door
• Water pressure booster system type: simplex, duplex, triplex, quadraplex
• Power distribution block for connection of utility power
• Service entrance rated, non fused disconnect switch w/pad-lockable operator handle on inner door
• Service entrance rated, manual transfer switch between utility and auxiliary power
• Generator receptacle for connection of auxiliary power
• Main power circuit breaker with through door pad lockable operator handle
• Power monitor with fuse protection
• Lightning arrestor
• Surge capacitor
• TVSS, 50 kA or 100 kA per phase
• Motor power circuit breakers
• NEMA rated motor starter with Class 20 fixed thermal overload heaters
• NEMA rated motor starter with Class 10 adjustable overload relay
• UL/HP rated (IEC) motor starter with Class 10 adjustable overload relay
• Reduced voltage solid state (RVSS)
  
• Variable frequency drives (VFD)
  
• VFD phase conversion - single phase input / 230 volt 3 phase output
  
• Control Logic: Relay / QMC Lite + / MultiTrode / PLC with Touch Screen
  
• Motor thermal monitoring circuit, indication and alarm light, shut down, auto reset
  
• Motor thermal monitoring circuit, indication and alarm light, shut down, manual reset
  
• Seal monitoring circuit, indication and alarm light, no shut down
  
• Seal monitoring circuit, indication and alarm light, shut down, manual reset
  
• Submersible pressure transducer for level sensing
  
• Float switches for level sensing
  
• Bubbler system for level sensing
  
• Elapsed run time meters, non reset type
  
• HOA (hand / off / auto) selector switches
  
• Function indicator lights (run, seal fail, over temp, etc)
  
• Flashing red alarm light mounted on top of enclosure
  
• Alarm buzzer, pulsating type, 95 db minimum at 2 feet
  
• Alarm horn, 110+ db minimum at 5 feet
  
• Intrinsically safe barriers
  
• Telephone auto dialer with 4 dry contact inputs
  
• Telephone auto dialer with 8 dry contact inputs
• Dry pump run / alarm contacts for connection to remote alarm / SCADA
  
• Battery back up on alarm light
  
• Listed under UL Standard 508 A __ Enclosed Industrial Control Panels
  
• Listed under UL Standard 698A __ Enclosed Industrial Control Panel Relating to Hazardous Locations with Intrinsically Safe Circuit Extensions
• Schematic diagram affixed to inside of enclosure door
  
• Layout and wiring diagrams in 8.5 x 11 format generated on AutoCad 2008
  
• List additional desired features: